Message:

<p>[QUOTE=&quot;rrdenarius, post: 2936638, member: 75525&quot;][ATTACH=full]714231[/ATTACH] </p><p>A Roman Steelyard Scale and weight arrived this week. The head on the scale looks like a late Roman bronze coin portrait to me. I have seen plenty of LRBs, but am far from an expert. The weight is shown above with coins of Licinius and Constantine. The weight on the left is one Roman pound and has a similar portrait on it. </p><p>The vendor&#039;s description:</p><p>ROMAN STEELYARD AND WEIGHT GROUP, 1st-2nd century AD</p><p>A mixed group comprising: a bronze steelyard with incised gradations, pierced bulb, knop finial, two loops with chains; a tongue-shaped lead weight with stamped profile bust to one face, graffito inscription &#039;ERLILAFAV&#039; to one face, &#039;[...]CID[...]&#039; to the other, loop above. 380 grams total, 73-22cm (3 - 8 5/8&quot;). [2]</p><p>Condition: Fine</p><p>Provenance: From a private collection; formed 1965-1975.</p><p><br /></p><p><b>Can anyone suggest who is on the weight(s).</b></p><p><br /></p><p>I posted my US steelyard scale recently. The following pic shows both. An assortment of weights is shown also.</p><p><br /></p><p>[ATTACH=full]714230[/ATTACH] </p><p>Shown above from top to bottom and left to right:</p><p>•&nbsp; &nbsp; <b>US steel-yard scale</b> – 22” overall length; weight = 985 grams; beam weight = 800 grams</p><p>o&nbsp; &nbsp; Low range scale = 6 to 28 lbs</p><p>&nbsp;&nbsp; &nbsp; &nbsp; Center to scale weight = 40 mm</p><p>&nbsp;&nbsp; &nbsp; &nbsp; Center to end of beam on weighing side = 470 mm</p><p>&nbsp;&nbsp; &nbsp; &nbsp; Scale marked in 2 lb increments 37.7 mm apart</p><p>&nbsp;&nbsp; &nbsp; &nbsp; 6 lb mark is 54 mm from center</p><p>o&nbsp; &nbsp; High range scale = 30 to 100 lbs</p><p>&nbsp;&nbsp; &nbsp; &nbsp; Center to scale weight = 10 mm</p><p>&nbsp;&nbsp; &nbsp; &nbsp; Center to end of beam on weighing side = 480 mm</p><p>&nbsp;&nbsp; &nbsp; &nbsp; Scale marked in 10 lb increments 53.5 mm apart</p><p>&nbsp;&nbsp; &nbsp; &nbsp; 10 lb mark is 72 mm from center</p><p><br /></p><p>•&nbsp; &nbsp; <b>Roman steel-yard scale</b> – 8” overall length; weight = 307 grams; beam weight = 70 grams</p><p>o&nbsp; &nbsp; Low range scale = ? to ? </p><p>&nbsp;&nbsp; &nbsp; &nbsp; Center to scale weight = 58.2 mm</p><p>&nbsp;&nbsp; &nbsp; &nbsp; Center to end of beam on weighing side = 142 mm</p><p>&nbsp;&nbsp; &nbsp; &nbsp; Scale marked in ? increments ___ mm apart</p><p>o&nbsp; &nbsp; High range scale = ? to ?</p><p>&nbsp;&nbsp; &nbsp; &nbsp; Center to scale weight = 44.7 mm</p><p>&nbsp;&nbsp; &nbsp; &nbsp; Center to end of beam on weighing side = 142 mm</p><p>&nbsp;&nbsp; &nbsp; &nbsp; Scale marked in ? increments ___ mm apart</p><p>o&nbsp; &nbsp; There are 3 sets of marks on the weighing end of the beam. My measurements averaged 18.4 mm apart, but they varied from 17.4 to 20 mm apart.</p><p><br /></p><p>•&nbsp; &nbsp; Aes rude with +; 48.7 grams</p><p>•&nbsp; &nbsp; PB shell; 58.9 grams – this could be a votive item, scale weight, sling piece, some form of pre-money, raw material for metal smith or something else. Recent austions tend to call it a votive item (kinda like a votive candle at church).</p><p>•&nbsp; &nbsp; Pb scale weight; 129.5 grams; the shape of this one makes it most likely a scale weight. The bottom is flat to prevent rolling on a scale pan.</p><p>•&nbsp; &nbsp; Roman scale weight; 332.3 grams; one pound (Libral) with marks and picture.</p><p>•&nbsp; &nbsp; Bell shaped lead weight; 317.9; I think this could be a loom weight. A recent article said many ancient fishing weights were misattributes as scale weights. This one is the right weight to be one Roman pound.</p><p>•&nbsp; &nbsp; Roman scale weight; 154.6 grams; half pound or one semis or 6 uncia. It is marked VI VNCIA</p><p>•&nbsp; &nbsp; Bronze Bar; 2.2 Kg bronze bar[/QUOTE]</p><p><br /></p>

Your name or email address:

Do you already have an account?

• No, create an account now.
• Yes, my password is:
• Forgot your password?

Stay logged in