Log in or Sign up
Coin Talk
Home
Forums
>
Coin Forums
>
World Coins
>
Help me to save a rarity - proper xylene usage instructions
>
Reply to Thread
Message:
<p>[QUOTE="robinjojo, post: 25390527, member: 110226"]Basically, I think that a long soak in 100% acetone should remove all PVC residue. If there is still some remaining, perhaps a second soak is in order. Acetone is a powerful solvent, and I find that it effectively removes PVC residue very quickly.</p><p><br /></p><p>Now the after photos of your coin indicate to me that the PVC is gone. Did you rinse the coin with distilled water? Using tap water may introduce chemicals, such as chlorine that may affect the surface. Distilled water is best. </p><p><br /></p><p>Are you concerned about the darkish lines running across the obverse and reverse? Those are very light deposits of silver oxide, possibly some kind of chemical interaction with an envelope in which the coin was restored.</p><p><br /></p><p>I've never used Xylene or Toluen so I cannot give you any advice for these chemicals. </p><p><br /></p><p>There is one chemical that is used by ancient coin collectors to remove horn silver, thick black deposits that occur on silver coins. This is <b>sodium thiosulphate</b>. It usually comes a small tablets that are dissolved in hot distilled water. This chemical is very effective in removing black deposits without affecting the coin's surfaces. However, depending on how thick the deposits are, there might be corrosion underneath. Given the very light color of these lines, that is probably not an issue with this coin. </p><p><br /></p><p>If you do use this chemical, I would suggest that you test it on an inexpensive coin to see the results. It does, based on my experience, leave the surfaces intact as far as mint luster is concerned. The trick is to rise the coin quickly and thoroughly with distilled water followed by drying in a soft towel - no rubbing.</p><p><br /></p><p>Cotton swaps are pretty safe to use if they are used to lightly dislodge deposits. I use them extensively on ancient and modern coins without any adverse results.</p><p><br /></p><p>Here's a thread that discusses sodium thiosulphate:</p><p><br /></p><p><a href="https://www.cointalk.com/threads/how-to-remove-encrustation-from-r-r-coin.348784/" class="internalLink ProxyLink" data-proxy-href="https://www.cointalk.com/threads/how-to-remove-encrustation-from-r-r-coin.348784/">https://www.cointalk.com/threads/how-to-remove-encrustation-from-r-r-coin.348784/</a></p><p><br /></p><p>Hope this helps, and good luck![/QUOTE]</p><p><br /></p>
[QUOTE="robinjojo, post: 25390527, member: 110226"]Basically, I think that a long soak in 100% acetone should remove all PVC residue. If there is still some remaining, perhaps a second soak is in order. Acetone is a powerful solvent, and I find that it effectively removes PVC residue very quickly. Now the after photos of your coin indicate to me that the PVC is gone. Did you rinse the coin with distilled water? Using tap water may introduce chemicals, such as chlorine that may affect the surface. Distilled water is best. Are you concerned about the darkish lines running across the obverse and reverse? Those are very light deposits of silver oxide, possibly some kind of chemical interaction with an envelope in which the coin was restored. I've never used Xylene or Toluen so I cannot give you any advice for these chemicals. There is one chemical that is used by ancient coin collectors to remove horn silver, thick black deposits that occur on silver coins. This is [B]sodium thiosulphate[/B]. It usually comes a small tablets that are dissolved in hot distilled water. This chemical is very effective in removing black deposits without affecting the coin's surfaces. However, depending on how thick the deposits are, there might be corrosion underneath. Given the very light color of these lines, that is probably not an issue with this coin. If you do use this chemical, I would suggest that you test it on an inexpensive coin to see the results. It does, based on my experience, leave the surfaces intact as far as mint luster is concerned. The trick is to rise the coin quickly and thoroughly with distilled water followed by drying in a soft towel - no rubbing. Cotton swaps are pretty safe to use if they are used to lightly dislodge deposits. I use them extensively on ancient and modern coins without any adverse results. Here's a thread that discusses sodium thiosulphate: [URL]https://www.cointalk.com/threads/how-to-remove-encrustation-from-r-r-coin.348784/[/URL] Hope this helps, and good luck![/QUOTE]
Your name or email address:
Do you already have an account?
No, create an account now.
Yes, my password is:
Forgot your password?
Stay logged in
Coin Talk
Home
Forums
>
Coin Forums
>
World Coins
>
Help me to save a rarity - proper xylene usage instructions
>
Home
Home
Quick Links
Search Forums
Recent Activity
Recent Posts
Forums
Forums
Quick Links
Search Forums
Recent Posts
Competitions
Competitions
Quick Links
Competition Index
Rules, Terms & Conditions
Gallery
Gallery
Quick Links
Search Media
New Media
Showcase
Showcase
Quick Links
Search Items
Most Active Members
New Items
Directory
Directory
Quick Links
Directory Home
New Listings
Members
Members
Quick Links
Notable Members
Current Visitors
Recent Activity
New Profile Posts
Sponsors
Menu
Search
Search titles only
Posted by Member:
Separate names with a comma.
Newer Than:
Search this thread only
Search this forum only
Display results as threads
Useful Searches
Recent Posts
More...