Log in or Sign up
Coin Talk
Home
Forums
>
Coin Forums
>
Coin Chat
>
Great tour of the Royal Mint
>
Reply to Thread
Message:
<p>[QUOTE="calcol, post: 26431819, member: 77639"]Visited the Royal Mint in Llantrisant, Wales today. What a great experience it was! Started with Google leading my wife and me to the security gate where trucks carrying coins and metals pass. Not surprisingly, we didn’t enter there but an employee kindly directed us to the visitor entrance. The staff was very friendly, and the tour guide was cheery and well informed. We elected to have the strike-your-own-coin and the tea for two options (extra cost but well worth it).</p><p><br /></p><p>The part of the tour through the factory was strictly no pictures. There were parts of various equipment types (presses, up-setter, edge letterer, sheet roller, etc.) and dies available to touch. The sheet metal rolls of base metal used for planchet production weigh 3 tons. Then it was through the factory floor separated from the presses only with a wire fence. This part of the factory, the largest part at 50 x 100 meters, is for production of circulating coins. There were many huge presses. We didn’t go through the bullion, proof and commemorative area. I’m guessing it was for security reasons … that’s where the precious metals are.</p><p><br /></p><p>Then it was on to the strike your own coin room. The coin was a 2-pound 2025 issue with the first passenger train (1825) depicted on one side and Charles III on the other. The planchet was a regular planchet (not proof polished) that was already upset and edge-lettered. The guide put the planchet in the 105-ton press and pushed the enable switches. Then I pushed the go switch. The upper die lowered to the planchet slowly. Then there were four quick strokes. I was surprised at how short the strokes were … only a few mm. The result was a PL business strike. The first two pics show it.</p><p><br /></p><p>The it was on to a brief illustrated talk on the history of the mint. That was followed by turning us loose in the museum. There were displays on mint history, the coining process and many rare coins. I took pics of three. The first was a silver penny of Alfred the Great who ruled 871-899. Next is a pattern sovereign of Edward VIII, who ruled for less than a year and abdicated to marry an American divorcee. Very few of his gold coins made it into private hands … value of over $1 million. Last is the 1933 penny. Believed that 7 were minted, but only 6 have been accounted for. Missing coin may still be in a junk pile somewhere. Value over $100,000.</p><p><br /></p><p>Finally there was tea for two, which was amazing. We were shown to the Pistrucci room. Pistrucci was an engraver and most famous for the St. George slaying the dragon design that appears on most sovereigns. It was a small quiet room with 3 tables with fancy chairs, white linen and exquisite china. There were 2 or 3 people per table. The tea was really good but the food surprised us with the amount and quality. It served us for lunch and supper (you can take away what you don’t eat there). See the last pic</p><p><br /></p><p>If you travel to the UK and can make it to the mint … go for it … you won’t be disappointed.</p><p><br /></p><p>Mike</p><p><br /></p><p>[ATTACH=full]1686206[/ATTACH] </p><p>[ATTACH=full]1686207[/ATTACH] </p><p>[ATTACH=full]1686208[/ATTACH] </p><p><br /></p><p>[ATTACH=full]1686209[/ATTACH] </p><p>[ATTACH=full]1686210[/ATTACH] </p><p>[ATTACH=full]1686211[/ATTACH] </p><p>[ATTACH=full]1686212[/ATTACH] </p><p>[ATTACH=full]1686213[/ATTACH] </p><p>[ATTACH=full]1686214[/ATTACH][/QUOTE]</p><p><br /></p>
[QUOTE="calcol, post: 26431819, member: 77639"]Visited the Royal Mint in Llantrisant, Wales today. What a great experience it was! Started with Google leading my wife and me to the security gate where trucks carrying coins and metals pass. Not surprisingly, we didn’t enter there but an employee kindly directed us to the visitor entrance. The staff was very friendly, and the tour guide was cheery and well informed. We elected to have the strike-your-own-coin and the tea for two options (extra cost but well worth it). The part of the tour through the factory was strictly no pictures. There were parts of various equipment types (presses, up-setter, edge letterer, sheet roller, etc.) and dies available to touch. The sheet metal rolls of base metal used for planchet production weigh 3 tons. Then it was through the factory floor separated from the presses only with a wire fence. This part of the factory, the largest part at 50 x 100 meters, is for production of circulating coins. There were many huge presses. We didn’t go through the bullion, proof and commemorative area. I’m guessing it was for security reasons … that’s where the precious metals are. Then it was on to the strike your own coin room. The coin was a 2-pound 2025 issue with the first passenger train (1825) depicted on one side and Charles III on the other. The planchet was a regular planchet (not proof polished) that was already upset and edge-lettered. The guide put the planchet in the 105-ton press and pushed the enable switches. Then I pushed the go switch. The upper die lowered to the planchet slowly. Then there were four quick strokes. I was surprised at how short the strokes were … only a few mm. The result was a PL business strike. The first two pics show it. The it was on to a brief illustrated talk on the history of the mint. That was followed by turning us loose in the museum. There were displays on mint history, the coining process and many rare coins. I took pics of three. The first was a silver penny of Alfred the Great who ruled 871-899. Next is a pattern sovereign of Edward VIII, who ruled for less than a year and abdicated to marry an American divorcee. Very few of his gold coins made it into private hands … value of over $1 million. Last is the 1933 penny. Believed that 7 were minted, but only 6 have been accounted for. Missing coin may still be in a junk pile somewhere. Value over $100,000. Finally there was tea for two, which was amazing. We were shown to the Pistrucci room. Pistrucci was an engraver and most famous for the St. George slaying the dragon design that appears on most sovereigns. It was a small quiet room with 3 tables with fancy chairs, white linen and exquisite china. There were 2 or 3 people per table. The tea was really good but the food surprised us with the amount and quality. It served us for lunch and supper (you can take away what you don’t eat there). See the last pic If you travel to the UK and can make it to the mint … go for it … you won’t be disappointed. Mike [ATTACH=full]1686206[/ATTACH] [ATTACH=full]1686207[/ATTACH] [ATTACH=full]1686208[/ATTACH] [ATTACH=full]1686209[/ATTACH] [ATTACH=full]1686210[/ATTACH] [ATTACH=full]1686211[/ATTACH] [ATTACH=full]1686212[/ATTACH] [ATTACH=full]1686213[/ATTACH] [ATTACH=full]1686214[/ATTACH][/QUOTE]
Your name or email address:
Do you already have an account?
No, create an account now.
Yes, my password is:
Forgot your password?
Stay logged in
Coin Talk
Home
Forums
>
Coin Forums
>
Coin Chat
>
Great tour of the Royal Mint
>
Home
Home
Quick Links
Search Forums
Recent Activity
Recent Posts
Forums
Forums
Quick Links
Search Forums
Recent Posts
Competitions
Competitions
Quick Links
Competition Index
Rules, Terms & Conditions
Gallery
Gallery
Quick Links
Search Media
New Media
Showcase
Showcase
Quick Links
Search Items
Most Active Members
New Items
Directory
Directory
Quick Links
Directory Home
New Listings
Members
Members
Quick Links
Notable Members
Current Visitors
Recent Activity
New Profile Posts
Sponsors
Menu
Search
Search titles only
Posted by Member:
Separate names with a comma.
Newer Than:
Search this thread only
Search this forum only
Display results as threads
Useful Searches
Recent Posts
More...