Message:

<p>[QUOTE=&quot;GDJMSP, post: 845818, member: 112&quot;]This is a very complicated issue and it has many things that impact or affect the determination of the grade.</p><p><br /></p><p>Learning to distinguish wear from a weak strike on Morgans is a tough thing to do. Breaks in the luster on the hair above the ear and eagle&#039;s brast are not a good indicator because there will be no luster on these weakly struck areas, or if they have wear. </p><p><br /></p><p>However, there is a way to tell wear from a weak strike - color. And no, not color from toning (but toning can confuse the issue) but in the metal itself. The weakly struck areas will be a darker shade of grey than the surrounding metal that has luster. And wear also shows a darker shade of grey. But the grey from wear is a slightly darker shade than the grey from a weak strike. So you have to learn how to distinguish one color from the other and recognize which is which.</p><p><br /></p><p>Then there is the texture of the metal. The hair above the ear is the high point. So as the coin is struck the metal is flowing, trying to fill this recess in the die. But if the pressure is not great enough to cause the metal to fill the recess completely then the top of that metal will be somewhat course and rough instead of smooth like the rest of the coin. It will somewhat resemble the rough texture of the fields of an early Buffalo nickel. So with a weakly struck coin you have metal that is a darker grey and that has a rough texture.</p><p><br /></p><p>Now the metal that has wear on the other hand will be smooth. And unlike most people think, wear does not remove metal from the coin, rather it smashes and flattens out the metal. And since this is a progressive process the metal is left smooth, or smoother, in areas of wear. So on worn areas you will find the darkest shade of grey and a smooth metal texture.</p><p><br /></p><p>Now both of these diffrences are subtle and it takes experience to recognize them. But with practice it can be learned. And the hair above the ear is far and away the easiest place to see the differences. The eagle&#039;s breast for example is much harder because of the fine detail and rough surface of the design. The wing tips however, if they have a lack of luster are almost always an indicator of wear. So if the wing tips are a darker grey than the rest of the wing it is almost a certainty that the coin has wear.</p><p><br /></p><p>These diagnostics work on other coins as well, but of course you have to look for them on the high points of the coin. And it needs to be understood that a weak strike is not always indicated by a lack of luster. For example, a weak strike does not always occur at the highest points. It can occur at mid-range high points as well like the legends or lower portions of the design elements. And when it does these areas will have luster, but the detail will not be complete and fully formed. And, the luster in these weakly struck areas will not be as full, as intense, as it is in the fully struck areas.</p><p><br /></p><p>Now, with all of this said, and assuming that you can correctly recognize the differences, you also have to be take into account that coins can very similar diagnostics and yet still be properly graded as MS. This is because the grading standards, both the ANA&#039;s and the TPG&#039;s, make allowances for what is called cabinet friction or roll friction. Friction (rub marks or what would otherwise be defined as light wear) from these causes is acceptable and is not defined as wear. </p><p><br /></p><p>Of course it is completely impossible to tell if the luster breaks (rub) was caused by cabinet/roll friction or by wear from circulation. So it is purely an arbitrary determination made by the grader when other evidence of wear is not present on the coin.</p><p><br /></p><p>This idea, or practice, in grading does not sit well with everybody. But it is the way it is in the hobby. Some, like myself, prefer to look at it from the perspective that wear is wear regardless of the cause. And that any coin that shows wear cannot be graded as MS. So you have to make the determination to either accept it or reject it on your own.[/QUOTE]</p><p><br /></p>

Your name or email address:

Do you already have an account?

• No, create an account now.
• Yes, my password is:
• Forgot your password?

Stay logged in