Log in or Sign up
Coin Talk
Home
Forums
>
Coin Forums
>
Error Coins
>
1969 S DDO
>
Reply to Thread
Message:
<p>[QUOTE="Coinattic_Hunter69 S, post: 2437309, member: 75163"]As per referenced to the this I wanna thank you for the suggestion. Though I am familiar with coppercoins.com I've already made comparison prior to all of this. compared mine with coppercoins but I couldnt up with a come to conclusion. I didn't pay much attention on the other 2 because they were insignificant to me at least. Since, you recommended again I thought may be I had missed something that I'll check it out later. In the mean time I started going through my little box of about 100 or less 1969 S's. I came 2 that I thought resembled a lot like the one posted in discussion it has what looked to be some what of the same die markers like is was strucked by the same die during production. liberty, IGWT, 1969 S the letters and numerals were similiar like same handwriting but it wasn't drastic like the one posted but I can see its the same handwrithing the same die. </p><p><br /></p><p>So, later on the day I found time and looked up coppercoins.com and sure enough the 2 1969's I had earlier the day matched up with out a doubt with 1969 s DDO CLASS Three and Five. I must say I was pretty excited how it matched up so well.... Thanks to you I now have 1969 S DDO class 003 and 005 I think thats correct regardless of class it is confirmed. I'll post photo's late to prove this. On the other hand I still haven't confirmed the one posted in speaking.... So, my question is what do the lower class 005 AND 003 1969 S DDO have in common with the class 001 1969 S? what does class 003 and 005 have in similarity with class 001 were they hit with the same die during production? before or after the changing of the hub where as class 1 was affected during this thus the creation of hub doubled? Was the mint using different set of dies during production, did they use only one single 1969 S die to mint during the entire year of 1969? I imagined they had few for back up when one wears out they will replace it. I'm guessing the dies are all exact similar in identity but with very "little differences" in distinguishing one from the other could this be? 1969 S Class 001 Class 003 and Class 005 was of the same production line minted from the same die? If this is correct than there is good "probability" that the device in discussion is genuine. Thank you[/QUOTE]</p><p><br /></p>
[QUOTE="Coinattic_Hunter69 S, post: 2437309, member: 75163"]As per referenced to the this I wanna thank you for the suggestion. Though I am familiar with coppercoins.com I've already made comparison prior to all of this. compared mine with coppercoins but I couldnt up with a come to conclusion. I didn't pay much attention on the other 2 because they were insignificant to me at least. Since, you recommended again I thought may be I had missed something that I'll check it out later. In the mean time I started going through my little box of about 100 or less 1969 S's. I came 2 that I thought resembled a lot like the one posted in discussion it has what looked to be some what of the same die markers like is was strucked by the same die during production. liberty, IGWT, 1969 S the letters and numerals were similiar like same handwriting but it wasn't drastic like the one posted but I can see its the same handwrithing the same die. So, later on the day I found time and looked up coppercoins.com and sure enough the 2 1969's I had earlier the day matched up with out a doubt with 1969 s DDO CLASS Three and Five. I must say I was pretty excited how it matched up so well.... Thanks to you I now have 1969 S DDO class 003 and 005 I think thats correct regardless of class it is confirmed. I'll post photo's late to prove this. On the other hand I still haven't confirmed the one posted in speaking.... So, my question is what do the lower class 005 AND 003 1969 S DDO have in common with the class 001 1969 S? what does class 003 and 005 have in similarity with class 001 were they hit with the same die during production? before or after the changing of the hub where as class 1 was affected during this thus the creation of hub doubled? Was the mint using different set of dies during production, did they use only one single 1969 S die to mint during the entire year of 1969? I imagined they had few for back up when one wears out they will replace it. I'm guessing the dies are all exact similar in identity but with very "little differences" in distinguishing one from the other could this be? 1969 S Class 001 Class 003 and Class 005 was of the same production line minted from the same die? If this is correct than there is good "probability" that the device in discussion is genuine. Thank you[/QUOTE]
Your name or email address:
Do you already have an account?
No, create an account now.
Yes, my password is:
Forgot your password?
Stay logged in
Coin Talk
Home
Forums
>
Coin Forums
>
Error Coins
>
1969 S DDO
>
Home
Home
Quick Links
Search Forums
Recent Activity
Recent Posts
Forums
Forums
Quick Links
Search Forums
Recent Posts
Competitions
Competitions
Quick Links
Competition Index
Rules, Terms & Conditions
Gallery
Gallery
Quick Links
Search Media
New Media
Showcase
Showcase
Quick Links
Search Items
Most Active Members
New Items
Directory
Directory
Quick Links
Directory Home
New Listings
Members
Members
Quick Links
Notable Members
Current Visitors
Recent Activity
New Profile Posts
Sponsors
Menu
Search
Search titles only
Posted by Member:
Separate names with a comma.
Newer Than:
Search this thread only
Search this forum only
Display results as threads
Useful Searches
Recent Posts
More...