Multi Struck Indian!

Discussion in 'Error Coins' started by 2coins, Oct 29, 2005.

  1. 2coins

    2coins New Member

    Heres a photo of a wounderfull Indian multi struck that a dealer freaind had that sold it!I wanted it, Oh well.........
     

    Attached Files:

  2. Avatar

    Guest User Guest



    to hide this ad.
  3. Speedy

    Speedy Researching Coins Supporter

    Was this coin graded???

    The back just looks funny to me...it seems that the 2nd strike would leave some reeding in the middle of the coin...??

    Speedy
     
  4. 2coins

    2coins New Member

    Yes he said the coin was also sent(graded) with the other error indian that I posted (mine) he said he sold it, but Iam thinking he keeped it!! Dont blame him abit, He didnt state to me the grade......
     
  5. ajm229

    ajm229 Lincoln Cent Collector

    I can see some of the reeding on the right-hand side of the photo. It looks like some of the reeding is worn down a bit, and the other factor is that the photo isn't taken at a good enough angle to show the reeding in the middle.
     
  6. Charlie32

    Charlie32 Coin Collector

    Indian cents don't have reeded edges. Maybe you are refering to dentils? That is a nice error 2coins.

    Charlie
     
  7. Speedy

    Speedy Researching Coins Supporter

    Right...sorry about that...

    I would have thought there would have been more...

    Speedy
     
  8. Krasnaya Vityaz

    Krasnaya Vityaz Always Right

    I wish I had that one. I like early errors.
     
  9. Conder101

    Conder101 Numismatist

    The reverse was the anvil die and the collar die kept the coin metal from getting into the very low area by the edge where the denticals are.

    Think about how the press parts are arranged before the strike. The reverse die is down in its retracted position and the collar die extends up around it. The previously struck cent is laying half over the coining chamber and is possibly tipped down with it's edge resting on the center of the reverse die. As the obverse die comes down it makes contact with the center of the struck coin and starts forcing it and the collar die down. (The collar die is mounted on heavy springs for just this reason. Otherwise the press would jam, or the collar or obverse die might break.) Th dies start to come together in the center and start creating the second strike on the coin beginning at the edge and moving toward the center of the coin as the dies come together. When the obverse reaches full travel distance, the top surface of the collar die is still above the surface of the reverse die face, so the coin is still inclined upwards slightly and the metal of the coin is not forced down below the surface of the reverse die there at the center of the coin so it never reaches the denticals and they do not appear in the center of the coin. (In the case of a stronger strike those denticals would be the very last thing to be struck up.)
     
Draft saved Draft deleted

Share This Page