Metal detecting

Discussion in 'Coin Chat' started by Gunner1944, Mar 3, 2018.

  1. Gunner1944

    Gunner1944 Active Member

    i am considering buying a Minelab 705 metal detector. I currently am using a Ace 400 with a Dietech coil. Can anyone other than u-tube tell me if they have experience with the Minelab 705. Paddyman I believe runs a Minelab, and his input would be a help. Is the 705 comparable to the 400. thanks for any help.
     
    paddyman98 likes this.
  2. Avatar

    Guest User Guest



    to hide this ad.
  3. paddyman98

    paddyman98 I'm a professional expert in specializing! Supporter

    Good question.
    Minelab and Garret are 2 different machines operating in 2 different styles of signals.
    Ace 400 is great. I don't know much about the Minelab 705. I went for the better CTX 3030. If I find out I will inform you.
     
    Stevearino and Gunner1944 like this.
  4. Gunner1944

    Gunner1944 Active Member

    I knew you were running the ctx, but that is a little out of my price range. I love detecting, and will probably will hit the beach tomorrow at low tide, after the storm has passed. I live in Mass. Newburyport area, right near the ocean, and 5 minutes from NH. I just don't trust a lot of crap on u-tube. I am looking for an upgrade from the 400, and have been looking at the Minelab units. Thanks for any help Paddy.
     
    paddyman98 likes this.
  5. lovecoinswalkingliberty

    lovecoinswalkingliberty Well-Known Member

  6. l.cutler

    l.cutler Member

    If you are planning on beach hunting, I would take a look at the new Minelab Equinox detectors. Multi frequency which is supposed to be good on salt water beaches, and they have beach modes.
     
  7. lovecoinswalkingliberty

    lovecoinswalkingliberty Well-Known Member

    Garrett Ace 400 is the best
    I have one
     
  8. lovecoinswalkingliberty

    lovecoinswalkingliberty Well-Known Member

  9. lovecoinswalkingliberty

    lovecoinswalkingliberty Well-Known Member

    Available only in United States
    ACE400 Metal Detector
    PN: 1141260.....MSRP: $399.95 (U.S.)

    Includes 8.5" x 11" DD PROformance™ submersible searchcoil (as shown) with 3 FREE Accessories*:

    The king of ACEs, the ACE 400 includes advanced features like Iron Audio, Digital Target ID, and Frequency Adjust to help you dig more treasure and less trash.

    Key Features
    • Iron Audio: allows user to hear discriminated iron targets and to alter the mid-tone signal range.
    • Digital Target ID: 0 to 99 scale offers target information
    • Higher frequency (10 kHz) provides better sensitivity on low and medium-conductivity targets (i.e. gold, lead)
    • Adjustable Frequency to help eliminate interference
    • Camlocks for better stem stability
    • Includes Pulse-Width Modulation audio: sharper, more responsive audio
    • 8.5" x 11" PROformance™ submersible DD searchcoil offers excellent coverage, depth
    • Enhanced Iron Resolution: twice the iron resolution of an ACE 250, to help separate good targets from adjacent junk iron
    • Includes Electronic Pinpointing: precisely locates targets and speeds recovery
    • Notch Discrimination: Modify discrimination patterns based on what you are seeking.
    • Five Search Modes (plus Pinpoint)
    • Eight (8) Sensitivity/Depth adjustments
    • Coin Depth Indicator determines target depth
    • Expanded Target ID legend: includes indication of U.S. coin denominations

    Highly Recommended - Coin Hunting, Jewelry Hunting, Relic Hunting, Competition Events, Dry Beach/Fresh Water Hunting

    Recommended - Cache Hunting, Prospecting, Ghost Town Hunting

    Specifications
    Digital Target ID YES, 0-99 scale
    Iron Audio feature YES
    Adjustable Frequency YES
    Camlocks Included YES
    Target ID Cursor Segments 12
    Iron Discrimination Segments 4
    Notch Discrimination YES
    Search Modes 5 (plus Pinpoint)
    Sensitivity/Depth Adjustments 8
    Electronic Pinpointing YES
    Frequency 10 kHz
    Audio Tone ID Levels 3
    Standard Searchcoil 8.5" x 11" DD PROformance™
    Length (Adjustable) 40" to 53" (1.016 m - 1.3462 m)
    Total Weight 2.9 lbs. (1.32 kgs.)
    Batteries 4 AA (included)
    Warranty 2 Year, Limited Parts/Labor


    * Accessory items are subject to change.
     
  10. lovecoinswalkingliberty

    lovecoinswalkingliberty Well-Known Member

  11. Bigpoppa

    Bigpoppa Active Member

    That’s a nice machine that you are looking at , however it is more suitable for dirt or dry sand hunting .
    If you are planning to regularly hunt wet sand then you need to upgrade higher I’m afraid to tell you .
    Good luck in your hunting ..
     
  12. Bigpoppa

    Bigpoppa Active Member

    If you can find an excellent condition ML Sovereign gt or Excal II then I would go that route if beach hunting us going to be your primary hunting grounds .
     
  13. Beefer518

    Beefer518 Well-Known Member

    I have a ML Explorer SE, and it does wonderfully in the wet salt sand of the Florida Gulf Coast. I would go with a Minelab over a Garrett any day.
     
    Bigpoppa likes this.
  14. Gunner1944

    Gunner1944 Active Member

    Going to be dirt hunting 90% of the time, and the beach 10%. Only good time to do the beach is after a storm at low tide. Around here it seems everyone has a machine and is on the beach.
     
  15. l.cutler

    l.cutler Member

    Lots of good upgrade options. I just got one of the new Equinox 600's, but weather hasn't cooperated to try it out much yet.
     
  16. Daniel Lowery

    Daniel Lowery Active Member

    I just bought g-kids the Garrett AT Max. I believe I paid $500+ for it. Is that a good one?
     
    Bigpoppa likes this.
  17. l.cutler

    l.cutler Member

    The AT series is Garrett's most popular line, the Max is the latest offering. Should be a very good detector.
     
    Bigpoppa likes this.
  18. Daniel Lowery

    Daniel Lowery Active Member

    Thank you. I feel better.
     
    Stevearino likes this.
  19. Bigpoppa

    Bigpoppa Active Member

    If that are your main hunting parameters then I would suggest ML EXPORER SE, GARRETT AT or a used by Excellent condition ML Etrac ..

    Remember you get what you pay for and in the long run those machines pay for themselves .

    I’ve seen killer dirt hunters using the ML Explorer SE :)

    I’ve been hunting off and on for 40 years, so one thing I do have is experience in case you wanted to know .

    Buy something that you will enjoy hunting with, that’s not too heavy and has an ease of use .
    Good luck man :)
     
  20. Bigpoppa

    Bigpoppa Active Member

    There are so many great used machines out there, because many buy them thinking they will be finding gold bullion every day .. lol
    Reality sets in or other issues and they quickly become discouraged making many available on the market .
    If you can affford the SE then I would go that route . I’ve seen very few repair issues with that model .

    SHOP AROUND !!

    Call every reputable dealer for the best price on the machine and don’t get caught up on all of the throw in stuff to try and sweeten the package .
    You need the MACHINE. The other stuff you can pick up cheap
     
  21. paddyman98

    paddyman98 I'm a professional expert in specializing! Supporter

    That's not totally true..
    When I was ready to purchase my AV Minelab CTX 3030 my first website had the machine for $2500.00 with no free items. The website I decided to purchase from had the same price plus a pinpointer, extra coil, and gloves all for free. So sometimes it is considered a sweet deal!
     
    Gunner1944 likes this.
Draft saved Draft deleted

Share This Page