1983 d rpm ????

Discussion in 'Error Coins' started by b8000, Sep 24, 2009.

  1. b8000

    b8000 Junior Member

    Could this be a rpm cent???
     

    Attached Files:

  2. Avatar

    Guest User Guest



    to hide this ad.
  3. fishaddicit

    fishaddicit Senior Member

    Sorry, apears to be a gas bubble. Alot of early 80's are common for that.
     
  4. Treashunt

    Treashunt The Other Frank

    it could be, but not from that picture.
     
  5. b8000

    b8000 Junior Member

    thanks guys for the info.........BACK TO THE HUNT
     
  6. rockdude

    rockdude Coin Collector

    Happy hunting.
     
  7. b8000

    b8000 Junior Member

    just got a new box of LP2 to check out
     
  8. just coins

    just coins New Member

    Well it's not a gas bubble I zoomed in 400 times it appears to be a die gouge or chip. I think better pics are needed to determine if it is a RPM.
    JC
     
  9. rockdude

    rockdude Coin Collector

    from what I can see, that is just the zinc rotting thru the copper plate. Zooming it only produces a pixelated view and nothing can be seen from that.
    In 1982 around October, everything changed when the U.S. Mint started striking cents with a core 99.2% comprised of zinc and .8% copper, with the cent bearing a thin outer coating of pure copper.
     
  10. just coins

    just coins New Member

    View attachment 58715 No when I zoomed in there was a line beneath the MM there are so signs or indication of any plating problem in the area. To me it looks like a amall die gouge just an opinion I must make that clear

    Here's the image near the MM a line and it looks like a raised line simular to a die gouge no plating problem
    Jazzcoins
     

    Attached Files:

  11. rockdude

    rockdude Coin Collector

    The image you provided is exactly what I'm talking about, to blurry to detect what you are saying.
     
  12. Digenes

    Digenes Just a collector

    I have to agree with Rockdude on this one. Way to much blur/pixilation on the photo to tell anything about it. That is the one thing if anything I have learned in searching for errors. If you zoom in enough you can see anything you want.

    Dave
     
  13. KurtS

    KurtS Die variety collector

    I would agree with that! :) Despite what's seen on TV CSI, enlarging a photo beyond its maximum resolution only interpolates existing data, and does not create more detail. Obviously if the details cannot be easily seen and discussed by everyone, then it becomes an interpretation which can quickly replace discussions based on fact. This shouldn't be about our imaginations--either the coin details indicate an error, die varitety, etc, or they do not.
     
  14. bhp3rd

    bhp3rd Die varieties, Gems

    That's right we might find Jimmy Hoffa in there.

    That's right we might find Jimmy Hoffa in there.

    But really, you got to know zinc rot, or plating lift or whatever you want to call it, that's what it is. Really we see these day in day out. The mint had great difficulty finding a way to assure the copper plating would adhere to the zinc core.
    1982 to 1985 I have seen some really bad coins - even today set a post 1982 cent outside along with a copper cent and see what happens.
    As I am searching my usual 7500 cents each week often people will roll up cents that have no use for commerce whatsoever - I literally throw them away in the garbage can. I don't want to do that but I will not re-roll them and pawn them off on you - they have no more use.
     
Draft saved Draft deleted

Share This Page