Sometimes when you talk to each other in the threads you let gold slip out

Discussion in 'Coin Chat' started by Southernman189, Sep 22, 2021.

  1. Cliff Reuter

    Cliff Reuter Well-Known Member

    Thanks for taking the extra time to spell out the thoughts and reasons. (I try to do the same so newer members can follow along with the info easier. Online is easier and harder at the same time.)
    I must be missing something here because with the ones I used, the mylar covered the cardboard and completely separated the coin from the cardboard.
    Yes, those have been "lurking" in the deep dark recesses of my mind.
    That was what I've been slowly leaning towards as well. I know they aren't hermetically sealed but do you know if the plastic used for them is ok as it ages and breaks down?

    Again, Thanks from myself and many untold hundreds of newer collectors who happen across your info and recommendations and it actually sinks in how inexpensive learning can be. (Coins don't have to be lost to trial and error.)
     
  2. Avatar

    Guest User Guest



    to hide this ad.
  3. GDJMSP

    GDJMSP Numismatist Moderator

    Some do cover the cardboard completely and some don't. But even those that do, there's still the edges which gasses can and do go through. And the mylar itself, while it a bit less air permeable than some other plastics, it is still air permeable.

    The bottom line is cardboard 2x2s and flips are simply a bad idea all around. And the main reason that most people use them is because they are cheaper than holders do what they should be doing - protecting the coin as best it can be protected.

    There's an old saying about that, and like almost all old sayings it got to be an old saying because of the truth it contains - you get what you pay for.

    And then of course there's the times that you don't get what you pay for, namely most of the, rather expensive coin albums - that have probably been responsible for destroying more coins than any other single reason.
     
    Cliff Reuter likes this.
  4. GDJMSP

    GDJMSP Numismatist Moderator

    Given the way this thread has progressed I'm going to move it to Coin Chat as this section (General Discussion) is supposed to be about things that have nothing to do with coins.
     
    Cliff Reuter likes this.
  5. dlts

    dlts Well-Known Member

    I've never heard of flat staples, either. Have you ever considered self adhesive coin flips? I have not tried them but am curious about how well they stay closed. It would eliminate the need for staples altogether.
     
  6. dlts

    dlts Well-Known Member

    Do the self adhesive cardboard coin flips work better to keep the air and gasses out? I do find that these flips are easier to store than individual coin holders.
     
  7. ldhair

    ldhair Clean Supporter

    Cardboard holders are not flips. They are cardboard holders. I would not use the self adhesive ones. You don't want that adhesive near your coins.
     
    dlts and Cliff Reuter like this.
  8. Phil's Coins

    Phil's Coins Well-Known Member

    A few years ago I ruined a 1927 S SLQ that was at least VF-20. I have never used a stapled flip since. I switched to self sealing flips from Amos Advantage and have not looked back. If I purchase a coin in a flip with staples, out comes the loupe befor I purchase.
    Semper Fi
    Phil
     
    dlts likes this.
  9. Phil's Coins

    Phil's Coins Well-Known Member

    I should have stated Cardboard not flips.
    Never had a problem with the glue either.
     
    dlts likes this.
  10. tibor

    tibor Well-Known Member

    Who offered the advice that the OP refers to? Is there a link
     
  11. Jeffjay

    Jeffjay Well-Known Member

    I use either my scissors handle or the edge of one of my magnifying glasses to flatten Staples on two by twos. Works great.
     
    dlts likes this.
  12. Randy Abercrombie

    Randy Abercrombie Supporter! Supporter

    I know what you mean about the “gold” gleaned from this place @Southernman189….. I been hoarding coins more than fifty years. I often take coins out of the 2X2 holders for books, flips or whatever. I was lamenting in a thread how worried I was potentially scratching a coin removing it from a stapled 2X2 and one of the members here says, “just cut the film and let the coin fall out”….. Well, duuhhh…. Of course! How simple is that and why the heck hadn’t I figured that out after fifty years!…. Lots of gold on this site to be had.
     
    dlts and Cliff Reuter like this.
Draft saved Draft deleted

Share This Page