Is this what a cracked die looks like?

Discussion in 'Error Coins' started by silentnviolent, May 17, 2009.

  1. silentnviolent

    silentnviolent accumulator--selling--make an offer I can't refuse

    picked from one of the $25 boxes of cents I picked up from a local bank. Is this a cracked die? The line seen is UPRAISED, not indented, and extends from above and to the right of the E in liberty, thru the E, out the bottom left, and continues all the way to the bottom of Lincoln's overcoat. One small, parallel section above the B in liberty. If a cracked die, does it get a premium or is it still just 1 cent? Oh btw, I ordered my second-in-the-series 2009 Lincoln cents... did you???? ;)
     

    Attached Files:

    • 008.JPG
      008.JPG
      File size:
      161.5 KB
      Views:
      95
  2. Avatar

    Guest User Guest



    to hide this ad.
  3. byrd740

    byrd740 Numismatist

    No its not a die crack. It looks like it is a die scratch. This is what a die crack looks like:
    [​IMG]
     
  4. just coins

    just coins New Member

    What it looks by the pics an elogated gas bubble
    JC
     
  5. jello

    jello Not Expert★NormL®

    I agree !
    Cents from1992-1994 are noted to have a lot of trapped air in planchets
     
  6. bqcoins

    bqcoins Olympic Figure Skating Scoring System Expert

    could also be a polish mark.
     
  7. jello

    jello Not Expert★NormL®

    It sure could be! a better photo would help. but it would not make it worth anymore that a cent.
    *but maybe a keeper to just as coin to keep to remind yourself what air or polish line are.
     
  8. huntsman53

    huntsman53 Supporter**

    It definitely is not a Die Crack or IMO, a Die Scratch! As mentioned earlier, it could be a result of a gas bubble or other but appears to be caused by a problem with the Copper plating adhering to the Zinc core. The longer line also runs all the way through the shoulder of Lincoln's coat and besides the smaller line, there appears to be some sort of scoring (abrasion) Southwest of the lines and to a lesser extent to the Northeast of the lines. My best guess is that the Zinc planchet was damaged and/or contaminated before the Copper plating was applied.


    Frank
     

    Attached Files:

Draft saved Draft deleted

Share This Page