Featured An Introduction to the Standing Liberty Quarter

wxcoin · May 8, 2020

Nyatii said: ↑

I think he left the breast hang out so that you didn't think it was some guy in a cape.
Click to expand...

I think they were afraid it would be regarded as the breast designed US coin.

Log in or Sign up to hide this ad.

Morgandude11 · May 8, 2020

This is a fantastic thread. As a longtime silver collector, there are a lot of things that I never knew about Standing Quarters. Bravo, John Hamilton, for a very educational thread!

Jim Dale · May 8, 2020

I have a couple of Standing Quarters, but they are in rough shape. I did get the gold one from the Mint. In fact, I was lucky enough to get all three.

Millard · May 9, 2020

johnmilton said: ↑

We were up a 60:30 to this morning to get to the "senior hour" at the food store at 7 am. Friday is steak night for us, and two pounds of tenderloin cost over $30, no, it was not prime beef. A meat packer today said that his business is "the new toilet paper."

Time for another piece from the archives, this one from 2011.

Although the Barber dimes, quarters and half dollars have many fans in the collector community, there are more than few numismatists who find these coins to be dull, bland and uninspiring. Back in 1892 when the U.S. mint introduced the Barber coins many people at the time were less than impressed with their appearance. Almost immediately there were moves afoot to replace them, but since that required an act of Congress, the designs stayed in place.

According to laws that are still in place, the Secretary of the Treasury can approve of a new design for a coin after the current design has been in place for 25 years. Therefore in 1915 Treasury secretary, William Gibbs McAdoo, initiated the steps to replace the Barber coins. One decision that McAdoo made from the outset was that dime, quarter and half dollar would each have different designs. From the very beginning, in 1794, all of the silver coins had had the same or similar design from the Flowing Hair motif of the 1790s until the Barber coinage. Now each of the three coins would have its own look.

Professional Artists Submit Designs

Chief mint engraver, Charles Barber, and his assistant, George Morgan, were asked to submit new designs, but none of their proposals were approved. Instead McAdoo chose to follow the precedent set by Theodore Roosevelt and Augustus St. Gaudens in 1907 and asked professional artists to submit designs. Herman, MacNeil, Albin Polasek, and Adolph Weinman were invited to participate. At first it was thought that each artist would design one coin, but MacNeil was chosen to design the quarter, and Adolph Weinman won the competition to model the dime and half dollar.

Mint officials devoted far more attention to Adolph Weiman’s dime and half dollar than to Herman MacNeil’s quarter. The dime had to be made in such a way as to be compatible with the coin operated vending machines and pay telephones that were in service at the time. The half dollar received special attention because mint officials hoped that a more attractive design would make that coin more popular in day to day commerce. The quarter received less attention.

View attachment 1112468

Photo courtesy Roger Burdette from Renaissance of American Coinage 1916 - 1921 page 113.

MacNeil’s Quarter Reflects the Concerns of the Time

Herman MacNeil’s Standing Liberty quarter design reflected the foreign policy concerns of the time. The obverse featured a figure of Ms. Liberty standing in a portal, holding up a shield on her left arm and an olive branch in her right hand. If the coin was placed in the U.S. on a map of the world, she is facing toward Europe where the First World War was raging. The concerns reflected in the design were that The United States needed to protect its interests in Europe and hope for peace. A feature that later collectors would view as controversial was the fact that one of Ms. Liberty’s breasts was exposed. Despite Victorian sensibilities, this feature was not controversial at that time. It was an accepted part of the art form.

MacNeil’s initial models, which would be similar to the coins that appeared in late 1916 and early 1917, had poorly defined design devices that would not have translated well to the finished coin. MacNeil’s second pass on his design sharpened the design and added two small dolphins at either side of the portals. These dolphins were symbolic of the Atlantic and Pacific Oceans that form the east and west boarders of The United States. Interestingly this dolphin symbolism appeared on the Panama-Pacific commemorative gold dollar in 1915.

View attachment 1112470

Although the designs are similar, the 1916 and 1917 Type 1 Standing Liberty Quarters differ in some subtle ways.

As 1916 drew to close, mint officials decided that they needed to issue a token number of quarters to comply with the 25 year design change law. Accordingly 52,000, 1916 Standing Liberty quarters were struck on December 16 thus creating a rare coin that would inspire and frustrate collectors in years to come. The dies that were used to strike these coins were made by Charles Barber and George Morgan using Herman MacNeil’s design ideas. The 1916 Standing Liberty quarters had better detail than many of the coins that the mint system would issue in subsequent years, but they were not perfect. In 1917 Barber and Morgan revamped the design so that its features would be sharper on the coin.

Herman MacNeil was not pleased with the mint engravers’ work. He wanted the standing figure on the obverse to be the same as the one that had appeared on the 1916 quarters, and he wanted to eagle on the reverse to fly higher, more toward the center of the coin. Barber and Morgan informed MacNeil that the current technology would not allow them to substitute only the figure on the obverse, and the placement of the eagle on the reverse would require an act of Congress because it would be substantive change in the design.

View attachment 1112471

1917 Type I Standing Liberty Quarter

View attachment 1112472

1920 Type II Standing Liberty Quarter. Note that the date was in a vulnerable position.

MacNeil Revises His Design

Accordingly Congress authorized changes to the design of Standing Liberty quarter design, and MacNeil proceeded to revamp his work in ways that exceeded his originally stated intentions. MacNeil raised the eagle on the reverse as he had stated that he would do earlier, but the artist made significant modifications to the standing figure that appeared on the obverse. The most significant of these changes was that Ms. Liberty was now covered from the waist up with a coat of chain mail.

For many years collectors have assumed that MacNeil made these changes because there had been objections to the “obscene” depiction of Ms. Liberty on the original design. In fact the reason was quite different. By 1917 The United States had entered World War I, and MacNeil wanted his Ms. Liberty to boost the war effort. Now she dressed for war and ready to defend U.S. interests. Unfortunately MacNeil’s modifications changed the metal flow when the coin was struck, and many pieces suffered a loss of detail. This problem would persist for the life of the series.

View attachment 1112474

"Full Head" detail.

Today a small, but dedicated group of collectors look for “full head” Standing Liberty quarters. The number of pieces that qualify for that designation is comparatively small, and some date and mint mark combinations are quite rare. The rarest dates in the series are 1916, 1921, 1923-S and the famous overdate, the 1918 over 7-S. The “full head” designation does not mean that the rest of coin is well struck. A Standing Liberty quarter with the “full head,” fully struck rivets on the shield and full gown line detail is a major prize, and a very scarce coin.

View attachment 1112473

1929 Type III Quarter. Note that the date is in a recessed area.

Additional Modifications in 1925

In 1925 the mint made one last change to the Standing Liberty quarter. On some pieces the date was poorly struck and almost unreadable even on Mint State examples. For all pieces the date was exposed and tended to wear off the coin after a limited amount of time in circulation. In 1925 the date was recessed into a more protected area, which improved that aspect of the design. Still the coin continued to give the mint problems.

View attachment 1112475

A 1932 Washington Quarter

The Great Depression caused a huge drop in demand for new coins. As a result the U.S. mint system did not issue any quarters in 1931. In 1932 Congress authorized the Washington quarter which ended the Standing Liberty quarter series well before its 25 year run. Herman MacNeil’s design, while beautiful when it was properly executed, had too much detail for a mass produced coin that was the size of a quarter. His decision to further complicate the design with even more detail in 1917 doomed the Standing Liberty quarter to an early retirement.
Click to expand...

Great article!

Log in or Sign up

Featured An Introduction to the Standing Liberty Quarter

wxcoin Getting no respect since I was a baby

Guest User Guest

Morgandude11 As long as it's Silver, I'm listening

Jim Dale Well-Known Member

Millard Coindog Supporter

Share This Page

Log in or Sign up

Featured An Introduction to the Standing Liberty Quarter

wxcoin Getting no respect since I was a baby

Guest User Guest

Morgandude11 As long as it's Silver, I'm listening

Jim Dale Well-Known Member

Millard Coindog Supporter

Share This Page

Useful Searches