Removing a coin from a lucite/acrylic paperweight block.

I recently bought this Uncirculated 1964 Kennedy Half Dollar in an acrylic triangle and I wanted to break it out. Here's how I freed it.






1) Using a hand drill I made a series of holes directly above the edge of the coin.




I repeated this process on the bottom continually checking that I'm not hitting the coin with the drill bit.




2) I cut two grooves on either side of the block to connect the end holes. I also cut across the two sets of holes.




3) Using a hammer and a screwdriver as a wedge, I started to crack the block. Using light taps I was able to crack it in two. My goal is not to force the screwdriver all the way through (and thus, damaging the coin), but rather to create tension and allow it to break on it's own.




4) The coin is still stuck fast, so I used the same process to now split the half-block.




5) This being successful, I was able to remove the coin with a gloved hand from the clinging remaining chunk using light pressure and pulling.

Viola!

 

Log in or Sign up to hide this ad.

Yes... but why?

You had a cool paperweight... now you have a generic half dollar.

I don't understand why you chose to do this.

 

Some things are better in hand than entombed in plastic.....

 

@Mr. Numismatist …that is a waaay cool rescue!

I was always of the opinion that coins entombed by lucite, epoxy or resin were irretrievable, but you really have a good solution. I thought the substances adhered to the coins’ surface and that the coin would be destroyed if removed, and I’m thinking substances other than lucite/acrylic may have that exact problem.

I’d never seen or heard of coins being recovered from these substances before today and your post. Spectacular success!

BTW,…I don’t see someone doing this on the acrylic toilet seat with embedded pennies…unless you saw a 1982 Denver Small Date in there somewhere. You would have to do all the work just to weigh it to find out…Spark

 

Just a thought. Would acetone react with the Lucite? Maybe another way to extract something entombed? Then again, if so, the reactive nature might damage the coin?

 

I enjoy it more as a coin than a paper weight. Also, I wanted to experiment if it could be done without damaging the coin.