1946 Penny error?? (Strange)

Discussion in 'Error Coins' started by maverickx31, Jun 1, 2013.

  1. maverickx31

    maverickx31 Member

    Hello. I found a few coins today and this penny has a strange weld like mark on Lincoln's head. This is not a scratch and it is raised. I tried to zoom in and take the best pics I could of it. Let me know what you think. Thanks for your opinions!
     

    Attached Files:

  2. Avatar

    Guest User Guest



    to hide this ad.
  3. maverickx31

    maverickx31 Member

    Another pic..don't know if it is better.
     

    Attached Files:

  4. jay4202472000

    jay4202472000 Well-Known Member

    Not sure about the possible crack/die break. Is that thing off center or is that just the way it looks through the magnification? I don't see the LIB or WE TRUST. Oh, I see now. It has one of those round extra magnification glasses. Sorry.
     
  5. maverickx31

    maverickx31 Member

    Yeah, sorry about the pic quality. Nothing else on this penny seems out of ordinary except for that mark on top. Have any ideas jay?
     
  6. maverickx31

    maverickx31 Member

    After doing some more research, I'm thinking this is a pretty good cracked die error?
     
  7. non_cents

    non_cents Well-Known Member

    Definitely not a die crack. Die cracks are erratic...this is not. That being said, I'm not sure what it is. It could be damage, or it could be a lamination error.
     
  8. maverickx31

    maverickx31 Member

    Die crack

    A die crack occurs when a die, after being subjected to immense pressure during the minting process, cracks, causing a small gap in the die.[3] If this damaged die cointinues to produce coins, the metal will fill into the crack, thus revealing a raised line of metal in the finished coin. Specimens with more prominent die cracks can command a high premium and are valued greatly by some collectors.[4] However, less obvious errors are quite common, especially in the 50 States Commemorative Quarter Program, yielding a lower value.[5]Die crack: Below sourced from Susan Headly "What is a Die Crack" Coins and Collecting.
     
  9. non_cents

    non_cents Well-Known Member

    I know what a die crack is. But have you ever seen a crack in the sidewalk? It isn't a line like this. It is erratic, zig-zaggy, and generally thin.
     
  10. lotusboyrulz

    lotusboyrulz Member

    i believe that the coin is off center. the coin is off center to the north east.
     
  11. non_cents

    non_cents Well-Known Member

    Look again...that's just the effect of the magnifying glass.;)
    It has one large lens, with a smaller lens in it.
     
  12. ldhair

    ldhair Clean Supporter

    Cracks don't look like that. It's just damage from something.
     
  13. jallengomez

    jallengomez Cessna 152 Jockey

    It's a deep gouge. Nothing but damage.
     
  14. 91stang2

    91stang2 Pocket change junkie

    This is the exact reason coin 'searchers' got to buy a microscope. I was hesitant, but way worth the time and money..I like the coin but needs better pics.
     
  15. jay4202472000

    jay4202472000 Well-Known Member

    I agree. Best $15 I have ever spent.
     
  16. maverickx31

    maverickx31 Member

    PHP:
    This is not a deep gouge! It is very raised! It may look like a gouge in the pic but I assure it isn't. You can feel the raise.
     
  17. jallengomez

    jallengomez Cessna 152 Jockey

    I can see the raised metal. Metal that was raised from the deep gouge and the object that hit the coin at an oblique angle. The damage where the object scraped across the coin is also clearly visible below the gouge.
     
  18. non_cents

    non_cents Well-Known Member

    I agree with Jodymon this one.
     
  19. Kentucky

    Kentucky Supporter! Supporter

    The "raised" metal is the displaced metal from the gouge.
     
  20. maverickx31

    maverickx31 Member

    Again, there is no gouge.
     
  21. Kentucky

    Kentucky Supporter! Supporter

    What it looks like is much like a plowed furrow with a ditch (or gouge) in the center and raised material on both sides. I am not seeing it in-hand, but from the photo.
     
Draft saved Draft deleted

Share This Page