The Cavilier Attitude towards flip

Discussion in 'Coin Chat' started by mrbrklyn, Aug 6, 2012.

  1. lkeigwin

    lkeigwin Well-Known Member

    I wouldn't agree with this. Any coin will be affected by long term exposure to PVC.

    Most of us know the difference in flips and are smart enough to use another holder for long term use. Still, it surprises me to receive coins in PVC flips. They go to the garage quickly.
    Lance.
     
  2. Avatar

    Guest User Guest



    to hide this ad.
  3. zekeguzz

    zekeguzz lmc freak

    I agree about the documentation but with a good label maker and software a lot more can be saved than depending on hand written
    info. It is a great deal of work but for neatness and clarity it works for me.
     
  4. buddy16cat

    buddy16cat Well-Known Member

    I thought those flips sold and used at coin shops were maylar flips. I bought a few loose ones at one shop and the other just gave them to me since I buy coins as well. Some are stiffer and clear. Is this flip Mylar?
    1898barber.jpg largecent.jpg mercurywalker.jpg
     
  5. Conder101

    Conder101 Numismatist

    Don't count on that. The acids that accumulate in the PVC residue will attack other metals as well. It is most noticeable with copper containing alloys because of the distinctive green color of the resulting copper compounds.
     
  6. SPP Ottawa

    SPP Ottawa Numismatist

    I didn't say that other metals were immune to attack, but they certainly can survive longer in PVC flips, like a dealer's inventory, than copper-based coinage. I recently bought a collection of nickel-only struck coins, that had resided in PVC flips for almost 35 years (the old Coindex boxes and flips). True, there was a thin green film on some of the coins, but a simple rinse in acetone and the nickel coins were perfectly fine, with no permanent damage. I probably would have cried if this particular collector had Victorian or Edwardian Canadian silver 50c coins or something in those old Coindex flips.

    I certainly don't support using PVC flips; my personal preference is mylar 2x2 flips.
     
  7. longnine009

    longnine009 Darwin has to eat too. Supporter

    I use a pair of small scissors to put cardboard
    incerts into flips. Just turn them until they are
    almost flat and they won't cut anything. Certs
    slide right in. You can even move them side to
    side and get them to go all the way in.
     
  8. green18

    green18 Unknown member Sweet on Commemorative Coins

    And neatness counts, don't it dear fellow.

    Good to see ya Zeke.......:)
     
  9. green18

    green18 Unknown member Sweet on Commemorative Coins

    I'm watching womens gymnastics at the moment and I completely understand.......
     
  10. mrbrklyn

    mrbrklyn New Member

    I'm not sure if I understand what you mean.
     
  11. green18

    green18 Unknown member Sweet on Commemorative Coins

    Watch womens gymnastics. It will become clear.......
     
  12. mrbrklyn

    mrbrklyn New Member

  13. cpm9ball

    cpm9ball CANNOT RE-MEMBER

    What?
     
  14. longnine009

    longnine009 Darwin has to eat too. Supporter

    You want to hold the incert in the scissors but you
    want the scissors nearly flat so you don't cut cardboard.
    When you insert the card into flip, the scissors will
    seperate the plastic making it easier to put the card
    in. They tend to jam up when they are
    about half way. The scissors will lift the
    plastic so you can get the rest of the card in.

    It takes seconds to do it this way instead wrestling (hope the Olympics doesn't have Sumu wrestling.)
    with it with your fingers.
     
Draft saved Draft deleted

Share This Page