Hi folks, got this in the mail the other day. As always opinions are welcome. What do you think? Should I send it to NGC and take the conservation service before? @micbraun @Seattlite86 Thanks.
I can't really judge the color from the photos there, but I'd say yeah, sure, it's worth a shot based on the detail, which appears to be in the "slider" range between upper AU and lower MS. There's a spot or two which is worrisome, though- particularly the greenish one below the "3" in the date. Is that why you mentioned Conservation service? There's also a whitish one by the "U" in UNITED. Is that one near the "N" in ONE as well? I also note a slight flatness of the rim above the second "T" in STATES. This looks like a faint rim bruise to me, but not enough to prevent a straight grade by itself, in my opinion. I think the spot by the "U" might also get a pass. Not so optimistic about the one below the "3" in the date. To be realistic, I'd semi-expect a "details" grade from this one, but it's still got pretty sharp detail, as mentioned, so even in a high AU or UNC details holder, the plastic could be nice to have, if you intend to resell it.
Looks quite different on my phone than on the monitor I saw it on a few minutes ago. Mmmyeah... I don't think that 'un will straight-grade. Still worth it to have it in a "details" holder, though? Maybe. Up to you. Worth spending extra money for conservation on it? No, I don't think so. Maybe a better candidate for a Dansco 7070 or similar album than a TPG slab.
If you think it will conserve and straight grade MS, then yes. Personally I don't think it will conserve and if it does, I don't think it will straight grade, and if it does, it won't be MS. It's not a rare coin, I think there's too much going against it, and too much additional cost involved even if it were to conserve and straight grade.
So I will upgrade my Dansco as @lordmarcovan suggested... that's fine. Thanks to all for the help as I'm not familiar with large old copper coins..... Paid 35 bucks...I think I did not so bad.....
Well yes if it were conserved and straight graded AU, it's around $100 retail. I think that's a tad high, and I prefer lower mintage coins. But there is some very good detail on this one.
Green spots on copper are a showstopper for me. As I haven’t submitted a copper coin for conservation so far, I really don’t know what to say. Can you return it?
@micbraun Hi Mike, thanks for your response. There is no need for a return. I like it for the AU/MS details and it looks great in the Dansco
Hi, @Rheingold. Good to see you collecting coppers. Great buy for $35. As some have pointed out, green on copper is not good. Due to the fact this is fairly common type and low value, I would not recommend spending money on conservation. What I would do is dip it in acetone. Initially a few minutes, see how much of the deposits can be removed. If, needed, extend the time a little. The colour is important for early copper collectors. Dark coins are least desirable. If you want to continue adding early copper here and there, my advice is to try to aim for shades like these: I paid about 90-100 euros for all three.
Inspector43, posted: "I won't put anything in a TPG holder." Since you have been collecting for 70 years, I'd suggest you have a few of your best coins graded using one of the TPGS using the $10 or less special. Otherwise, you and the folks who will get your coins MAY be in for a big shock! Eduard, Each of the beautiful coins you posted would look much better if they were conserved. Two have that dirty grease buildup and one has green corrosion spots.
You can send it in, but I don't think that it is worth it. It looks like artificial toning to me. It should get a "details" or "questionable toning" mark on the label.
Just step up to the plate, take your turn at bat like the rest of us, send it in. In terms of potential get out a glass along with your ANA grading book, take a look.