1998 D Lincoln Penny with Piece of Reverse Stuck on Obverse

Discussion in 'Error Coins' started by Kim Marino, Dec 7, 2022.

  1. Kim Marino

    Kim Marino Member

    I found this 1998D penny in a penny roll. As shown in the pictures, a reverse piece of a penny is stuck on the obverse side of this 1998 penny.
    Thoughts on how this could happen and if it is worth keeping?
     

    Attached Files:

  2. Avatar

    Guest User Guest



    to hide this ad.
  3. GH#75

    GH#75 Trying to get 8 hours of sleep in 4. . .

    Looks like a vice job. Not an error.
     
    Spark1951 and Heavymetal like this.
  4. Kim Marino

    Kim Marino Member

    So this couldn’t be a result of a bottle capping or mated pair situation when the coins are pulled apart?
     
  5. Heavymetal

    Heavymetal Supporter! Supporter

    Over the date is ..VE CENTS from a US nickel
    Not something that happens at the mint
     
  6. Kim Marino

    Kim Marino Member

    If you look at VE Cent as a mirror image on a penny, it looks like the V may be part of the N in ‘ONE’.
     
    Pickin and Grinin likes this.
  7. Heavymetal

    Heavymetal Supporter! Supporter

    You’re probably right
     
  8. derkerlegand

    derkerlegand Well-Known Member

    kinda looks like a glue job
     
  9. SensibleSal66

    SensibleSal66 U.S Casual Collector / Error Collector

    Altered coin.;) Glue job. :wacky:
     
    Oldhoopster and Kevin Mader like this.
  10. Kim Marino

    Kim Marino Member

    That’s what I thought initially but usually there is some indication of glue. I’m going to take it to a local coin shop.
     
  11. Kim Marino

    Kim Marino Member

    Thanks for your input. I still think I will take it to a local coin shop.
     
  12. Inspector43

    Inspector43 More than 75 Years Active Collecting Supporter

    It may have come from one of those mailing factories that glue coins to advertisements. Somewhere in the process there could have been an unintentional transfer of the glue. I have seen similar coins in the past.
     
  13. expat

    expat Remember you are unique, just like everyone else Supporter

    10 minute bath in acetone (100%, not nail polish remover) will loosen it as it looks like an image on adhesive
     
  14. Kim Marino

    Kim Marino Member

    Thanks for the info.
     
  15. Kim Marino

    Kim Marino Member

    Ok Thanks for the info.
     
  16. PamR

    PamR You Never Know! Supporter

    It would have blended into the metals together. Sort of like “ mixed” in together if it were from the mint. Wrong terminology maybe but you see what I’m saying. Sorry!
     
  17. Kevin Mader

    Kevin Mader Fellow Coin Enthusiast Supporter

    It's glue. The acetone bath will eventually lift the glue off the face of the coin.

    Welcome to CT!!
     
  18. Inspector43

    Inspector43 More than 75 Years Active Collecting Supporter

    Here is some glue that I peeled off of a dime and cent. It usually comes off quite easily.
    Cent Glue.jpg Dime Glue.jpg
     
    Clawcoins and Kevin Mader like this.
  19. Kim Marino

    Kim Marino Member

  20. Mountain Man

    Mountain Man Well-Known Member

    As stated above, it appears to be a glue or glue-like substance that acetone should soften to the point you can simply "peel" it back. Maybe use a wooden tooth pick of you are trying to preserve the glue part.
     
    Kim Marino, Inspector43 and expat like this.
  21. Inspector43

    Inspector43 More than 75 Years Active Collecting Supporter

    Exactly what I did on this example. I'm showing the peeled off glue and the surface after it was peeled off. Soaked for a while then peeled it back with a toothpick.
    220207074539848.jpg 220207074716106.jpg 220207132240144.jpg 220207132322128.jpg
     
Draft saved Draft deleted

Share This Page